5-7. Picture in Picture (PinP) Operation

2 video inputs can be shown on 1 display using picture in picture [PinP] and can be setup using either [Quick PinP] or [Manual PinP]

Setup Quick PinP

Long press the display which you would like to use as the sub display, when the grey rectangle appears drag it to the display you would like to use as the primary display.

You can change the size of the sub display using a pinching motion and move it by touching and dragging it.

pinp01

After you have decided the size and the position of the sub display double tap on the main display to save the selection.

pinp02

A long press on the sub display allows you to resize and reposition the sub display. To remove the PinP mode, select the sub display and drag it to the recycle bin.

pinp03

Setup Manual PinP

Add [PinP] to an effect channel. Long press the channel or tap [add], then choose [PinP] from the function menu on the left side of the display.

Choose a sub display then tap [NEXT]

pinp04

Adjust the border thickness of the sub display in [FRAME WEIGHT], adjust the border colour of the sub display in [FRAME COLOR] and adjust the position of the sub display in [PATTERN]. Tap [NEXT] to confirm the settings.

pinp05

You can change the size of the sub display using a pinching motion and move it by touching and dragging it. To assign [PinP] to the selected effect channel tap [OK].

pinp06

The edited PinP mode will be active in the selected effect channel. Tap PinP again to disable to the PinP mode.

pinp07

How to switch a display

It is possible to lock displays in PinP mode by sliding the [<< LOCK] slider.

If a display is locked it is unable to be switched. (If a sub display is locked, a main display can be switched. If a main display is locked, a sub display can be switched. If both displays are locked then nothing can be switched)

pinp08